What settings should I use for BYO Modem?

When you connect your own Modem, you will need to enter some 2degrees settings to connect to the internet. These settings are different if you have an ADSL, VDSL, or Fibre connection.

If you have an ADSL connection, use these settings:
- Username: Your username@snap.net.nz
- Password: The password you chose at sign up.
- Encapsulation: PPPoA / VC-MUX
- VPI: 0
- VCI: 100

If you have a VDSL connection, use these settings:
- Username: Your username@snap.net.nz
- Password: The password you chose at sign up.
- Encapsulation: PPPoE
- VLAN ID: 10
- VPI: 0
- VCI: 110

If you have a Fibre connection, use these settings:
- Username: Your username@snap.net.nz
- Password: The password you chose at sign up.
- Encapsulation: PPPoE
- VLAN ID: 10

If you need help setting up your own modem, we recommend that you contact the modem manufacturer so they can help you with the setup, or take a 2degrees modem instead.

 

Frequently Asked Questions

See more