Internet set up

1. On the Main Menu on your iPhone select Settings
2. Scroll down to select General
3. Scroll down to select Network
4. Select Enable 3G Select ON
5. Select Data Roaming select ON
6. Select Cellular Data Network
7. Select APN and Write internet
8. Leave Username and Password Blank
9. Back to the Main Menu
10. Power down the iPhone and restart it.

Internet should now be operational

MMS Setup

1. In Main Menu select Settings Icon
2. Scroll down to select General
3. Scroll down to select Network
4. Select Enable 3G and turn it ON
5. Select Cellular Data and turn it ON
6. Select Data Roaming and turn it ON
7. Select Cellular Data Network
8. Scroll down and select APN and type the word mms
9. Leave Username and Password blank
10. Select MMSC and type: http://mms.2degreesmobile.net.nz:48090
11. Select MMS Proxy and type: 118.148.001.118:8080
12. Select MMS Max Message Size and type: 300000
13. To get MMS working on a iPhone, ensure the below settings are correct.

To turn your MMS ON please don't forget to:

1. Select on Settings
2. Scroll down to select Messages
3. Select MMS Messaging
4. Swipe to turn MMS Messaging ON

Bluetooth Set up

1. On the Main Menu select Settings
2. Scroll down to select General
3. Scroll down to select Bluetooth
4. Select ON

It will now begin searching for active devices.

If you are asked for a PIN / Password for your Bluetooth Device please refer to the corresponding handsets manual as it may be contained there.

Wifi set up

1. On the Main Menu select Settings Icon
2. Select the Wi-Fi option
3. If it is OFF, select the on/off switch and it will turn ON
4. If you are asked for a password for your Wi-Fi Network please refer to Home Network Administrator for the wireless network password, or seek assistance from your ISP.

If connecting to a public WiFi connection please be aware that 2degrees will NOT have the password for this as it will be generated by the supplier of WiFi connection.

Personal Hotspot set up

Personal Hotspot refers to the Internet-sharding feature on iPhone 3GS or later.

1. On the Main Menu select Settings Icon
2. Select General
3. Select Network
4. Ensure 3G is enabled, Cellular Data & Data Roaming are ON
5. Select Cellular Data Network
6. Scroll down to Internet Tethering and enter Internet in the APN field
7. Exit out of Settings to save changes
8. Go back to Settings (Personal Hotspot should now appear)
9. Scroll down and select Personal Hotspot and turn it ON
10. On the iPhone 3GS choose whether to enable Bluetooth or USB. On iPhone 4 if WiFi is currently off, you will be prompted to enable it.
11. After configuring Personal Hotspot, you can directly access the settings from Settings > Personal Hotspot.

Note: You cannot use your WiFi connetion for Internet connectivity while other devices are using WiFi for Personal Hotspot. You can only share a Cellular Data connection, you cannot share a WiFi connection.

Message Center Number

With your iPhone it uses codes for some services such as the Message centre number (also known as SMSC). This number enables the ability to send and receive texts to and from your device. The SMSC number for 2Degrees is: +64220227672 so it’s very important to ensure this information is correct when having problems texting.

The Code: *#5005*7672#

Displays the SMSC Settings on your phone (example picture to the left)

The Code: **5005*7672*SMSCNUMBER#

Changes the SMSC Number to the SMSCNUMBER you define.

This MUST be in international format

i.e. **5005*7672*+64220227672# for 2degrees SMSC